Corrugating Machinery:Lineup WET END EQUIPMENT

SINGLE FACER

SINGLE FACER　model 60H

Mitsubishi Heavy Industries Machinery Systems high performance fingerless Single facer, "60H" gives high speed and easy operation, with unmatched product quality across all board types from thin board to thick board.

  • Pressure belt system produces high-quality board without pressure-roll marks!
  • Speedy roll casette change system provides efficient multi-flute production!
  • Process commander control device enables operator-friendly auto-operation!
60H Single Facer
60H SINGLE FACER

Standard/Option

Slide horizontally to see the table.

Machine Type 60H Single facer
Max. Machine Speed 450m(17.72")/min
Machine Width 1,800mm (70.87"), ?2,000mm (78.74"), ?2,200mm (86.61"), 2,500mm (98.43"), ?2,800mm (110.24")
Standard
  • Motorized cartridge moving device
    (Patented) Automatic and hydraulic nip belt alignment device
  • Hydraulic loading of lower corrugating roll with analogue indication of loading pressure
  • Integral 600mm diameter preheat roll with wrap angle control device for medium
  • (Patented) Automatic gap fine adjusting device between adhesive roll and applicator roll
  • Process commander
  • Automatic and hydraulic actuation of adhesive mechanism
Options
  • Cartridge for upper/lower corrugating rolls with automatic connects/disconnects of steam, drain and air piping
  • Cartidge turning and lateral moving device
  • Preheating device for corrugating roll at stand-by position
Machine Installed 128machines (Jan.2010)

Specifications and designs are subject to change without prior notice and without any obligation on the part of manufacturer.

PREHEATER

Preheater model 51C/52C

Motorized entrance wrap roll and process control function mend controlled preheating!

51C Triple Preheater

Standard/Option

Slide horizontally to see the table.

Machine Type 51C Liner preheater (note 1) 52C Medium preheater (note 1) 51C Triple preheater
Machine Width 1,800mm, 2,000mm, 2,200mm, 2,500mm
Preheating Drum Standard Diameter 910mm (35.83") 500mm (19.69") 910mm (35.83")
Preheating Drum Optional Diameter 750mm (29.53"), 1,100mm (43.31") 750mm (29.53"), 910mm (35.83"), 1,100mm (43.31") 1,100mm (43.31")
Standard
  • 2 rolls system motorized single warp arm at entrance side
  • Wrap angle detecting device
  • Independent drive device (note 2)
  • 1 roll system motorized single warp arm at entrance Side
  • Wrap angle detecting device
  • Independent drive device (note 3)
  • 1 roll system motorized single warp arm at entrance side
  • Wrap angle detecting device
Options
  • Air disk brake
  • Tension rectification roll device at entrance side
  • 2 rolls system motorized adjustable wrap idler at entranse side
  • Tension rectification roll device at entrance side
  • Air disk brake
  • 2 Rolls system motorized adjustable wrap idler at entranse side
  • Tension rectification roll device at entrance side
  • Independent drive device
  • 1Depends on double/single preheater, and length, we can offer required speed.
  • 2Only upper drum operates in combination of 60H Single facer and double liner preheater.
  • 3Only bottom drum operates in combination of 60H Single facer and double medium preheater.
    Specifications and designs are subject to change without prior notice and without any obligation on the part of manufacturer.

MILL ROLL STAND

Mill Roll Stand model 53B

Easy paper roll change!
That is Mitsubishi Heavy Industries Machinery Systems Mill roll Stand, 53B!

53H Mill Roll Stand
53H Mill Roll Stand

Standard/Option

Slide horizontally to see the table.

Machine Type 53B Mill roll stand
Machine Width 1,800mm (70.87”), 2,000mm (78.74”), 2,200mm (86.61”), 2,500mm (98.43”)
Max. Paper Diameter 1,524mm (60.00”)
Min. Paper Diameter 330mm (12.99”) (manual chucking)
450mm (17.72”) (auto chucking)
Standard
  • Swing arm
  • Shaft-less type
  • Pneumatic disk brake device
Option
  • Auto-chucking device
  • Powder brake or RE brake device
  • Auto de-chucking device
  • Re-winding device

Specifications and designs are subject to change without prior notice and without any obligation on the part of manufacturer.

AUTO SPLICER

Auto Splicer model model 63-1J/53-1D

Max. splicing speed: 640m/min World's Fastest!
No wrinkle, tension pick-up and control out-feed paper.

63-1J Auto Splicer/53-1D Auto Splicer
63-1J Auto Splicer/53-1D Auto Splicer

Standard/Option

Machine Type 63-1J Auto splicer 53-1D Auto splicer
Max. Splicing Speed 640m(25.20”)/min(note 1) 350m(13.78”)/min(note 1)
Machine Width 1,800mm (70.87”), 2,000mm (78.74”), 2,200mm (86.61”), 2,500mm (98.43”)
Max.Paper Width 1,300mm (51.18”) 1,524mm (60.00”)
Max. Splicing Speed on Tail Catcher Splicing Mode 300m(11.81”)/min 300m(11.81”)/min (note 2)
Standard
  • Double (2rolls) dancer roll system
  • Tension pick-up roll and control device
  • Tail catcher splicing control
  • Double (2rolls) dancer roll system
  • Tail catcher splicing control
Option
  • Triple (3rolls) dancer roll or quadrapull (4rolls) dancer roll
  • Remaining paper length splicing speed
  • 1This speed is when you adopted optional specification.
  • 2For Max. paper width 1,300mm.

63-1J Auto splicer: Specification of flame length/Number of dancer

Depending on flame length/number of dancer roll, we can offer following Max. splicing speed.

Slide horizontally to see the table.

Flame length Number of dancer roll
2 rolls 3 rolls 4 rolls
4,560mm 350m(13.78”)/min 425m(16.73”)/min 475m(18.70”)/min
5,150mm 385m(15.16”)/min 465m(19.10”)/min 525m(20.67”)/min
6,660mm - 560m(22.05”)/min 640m(25.20”)/min

Specifications and designs are subject to change without prior notice and without any obligation on the part of manufacturer.

GLUE MACHINE

Glue Machine model 65H/55D

Process commander (Integrated with Sigma2000 tatal control system) setting of rider roll eliminates crushing caliper loss.

55D Glue machine
55D Glue machine

Standard/Option

Slide horizontally to see the table.

Machine Type 65H Glue machine 55D Glue machine
Max. Machine Speed 400m(15.75”)/min 300m(11.81”)/min
Machine Width 2,200mm (86.61”), 2,500mm (98.43”), 2,800mm (110.24”) 1,800mm (70.87”), 2,000mm (78.74”), 2,200mm (86.61”), 2,500mm (98.43”)
Standard
  • Preheat rolls with manual hand brake for bottom and single faced web
  • Automatic and pneumatic loading and unloading of rider roll (for single faced web)
  • Chrome plated and gravure engraved adhesive applicator rolls
  • Motorized rider roll gap fine adjusting device
  • Independent driving device
Optional
  • Process commander (Integrated with control system Sigma 2000)
  • Additional preheat drum for upper single faced web (750mm dia.)

Specifications and designs are subject to change without prior notice and without any obligation on the part of manufacturer.

Stories of MHI Group Expertise