67N Slitter Scorer

67N Slitter Scorer is adapted tandem configuration and each station equips with two scorer shafts and one slitter shaft. Special scorer head is also available.

Advantages

Lower knives slit and the slitter heads are driven by servo motors, realizing to reduce defective sheets when order changes and to adjust knife height automatically.

Slitter Scorer 67N

Specifications

Model 67N Slitter Scorer
Maximum Machine Speed 450m per minute
Machine Width 2,500mm (98.43"), 2,800mm (110.24")
Maximum Box-Out 8 boxes-out (See note 1)
Minimum Slitting Width 190mm (7.48")
Minimum Scoring Width 0mm (Minimum width on same shaft: 120mm (4.72"))
Standard Specifications
  • One piece ring type slitter head and thin knife
  • Lower knife slit
  • Individual up/down control for slitter knife: servo motor control
  • Individual automatic re-sharpening
  • Upper and lower scorer head
  • Motorized scorer gap adjusting
  • Automatic adjustment of slitting depth on each slitter knife
  • Trim press guide (trim suction miss prevention)
  • Vacuum paper dust removal device for slitting
  • Scorer double run control with tandem unit

(Note1) In case of 2,800mm width machine.

(Note2) Specifications and designs are subject to change without prior notice and without any obligation on the part of manufacturer.

 

For brochures or more information about equipment, service offerings or parts, please email [email protected].